Custom Logo Mini Stapler Set in Card Pack
This mini stapler set comes in an individual card pack with your logo, a handy desk item for staff, students and event guests. A low-cost office giveaway for schools, banks and trade shows.
Minimum order: 500 pcs
Specifications
| Type | Mini stapler with staples |
|---|---|
| Capacity | About 2–12 sheets of 70 gsm paper |
| Stapling thickness | Up to 6 mm |
| Packaging | Individual blister card |
| Logo | Printed logo (proof approved before production) |
| Minimum order | 500 pcs |
| Lead time | Lead time is confirmed with your quotation |
How to Order
Product information
- Send us your logo and requirements (quantity, color, print position)
- Confirm the quotation and digital proof
- Production starts after approval
- Shipping and delivery
Artwork Approval
Our artwork layout service does not include proofreading or print-readiness checks. Please carefully review and approve the final artwork, including alignment, image resolution, text size and line thickness. Subject to applicable consumer rights, refunds or exchanges are not available for printing issues resulting from errors or quality limitations in the approved artwork.
Product Color Disclaimer
Product images are for reference only. Colors may vary due to lighting, photography and screen settings. Please refer to the physical product for the actual color.
Branding methods
Seven ways to put your logo on it
The same logo reads differently printed, engraved, pressed or foiled. We will recommend the one that suits the material.
Screen printing
Ink pushed through a mesh stencil, one color at a time.
A stencil is made for each color, then ink is pressed through it onto the product. The ink sits on the surface as a solid layer, so colors stay bright and consistent across a whole run, and the cost per piece drops quickly as quantities rise.
- Best for
- One or two flat colors on a large order
- Good to know
- Every color needs its own screen, so gradients and photographs are not suitable.
Digital UV printing
Full color printed straight onto the product and cured on contact.
The design is printed directly onto the surface and hardened under ultraviolet light as it goes down. It holds fine detail, gradients and photographic artwork without a separate screen for each color, and can be layered to leave a slightly raised, textured finish.
- Best for
- Detailed or full color logos on flat surfaces
- Good to know
- Small runs are economical because there is no screen to set up.
UV transfer printing
A printed film wrapped on with heat and pressure.
The artwork is printed onto a thin transfer film, then pressed onto the product. The film follows the shape underneath, so it reaches curves, ridges and small round surfaces that a flat printer cannot.
- Best for
- Full color on a curved or uneven surface
- Good to know
- Ask for a wrap check if the artwork runs all the way around.
Laser engraving
The mark is cut into the material rather than laid on top.
A focused laser removes a thin layer of the surface and reveals the material underneath. There is no ink, so nothing can peel, scratch off or fade. On stainless steel it reads as a soft gray; on wood and leather it burns darker than the surface around it.
- Best for
- A permanent mark on metal, wood or glass
- Good to know
- The color comes from the material itself, so it cannot be matched to a brand color.
Deboss and emboss
The design is pressed into the surface with a metal die.
A die made for your logo presses it into the material. Debossing pushes the shape down, embossing raises it up. There is no ink at all, so the branding is felt more than it is seen, which is why it suits leather goods and heavier paper stock.
- Best for
- Quiet, tactile branding on leather and paper
- Good to know
- Fine hairlines and very small type lose definition once they are pressed.
Heat transfer printing
A printed design bonded to fabric with a heat press.
Your artwork is printed onto a transfer sheet, then pressed onto the garment with heat and pressure so it bonds to the fibers. Because the design is printed first, it carries full color, gradients and fine detail that screen printing cannot reach, and it works just as well for small runs as for large ones.
- Best for
- Full color logos on fabric and apparel
- Good to know
- Best on flat panels. Very large solid areas can feel heavy on thin fabric, so we usually keep the design compact.
Foil stamping
A mirror finish in gold, silver, rose gold or holographic.
A heated die presses reflective metallic foil onto the surface, leaving a clean, solid mark with a mirror sheen. It catches the light as the piece moves, which is why it is usually kept for the logo alone rather than large areas of artwork.
- Best for
- A premium accent on packaging and gift sets
- Good to know
- One color per pass, and large solid areas can show pinholes. Small marks and type hold best.
How it works
How to order
Tailored solutions crafted for every unique brand.
Gift Selection
Browse our website for the items you need. Contact us via WhatsApp, email or the inquiry form for pricing.
Customization
Confirm the product type, quantity and budget. We will discuss the customization details with you.
Confirm Quote
We issue an official quote. Once confirmed, artwork preparation will begin.
Artwork Approval
Provide your logo or design file. We will create a layout and proof for approval.
We prepare the layout from the file you send. Original design work is not included.
Order Deposit
A 50% deposit is required for bulk orders. Production will start once payment is confirmed.
Production
We will keep you updated on the production progress.
Fulfillment
Goods will be shipped after the balance payment is settled.
Your quote includes shipping to one address.
Support
Contact us within 7 days of delivery for any shipping or product issues, and we will respond promptly to assist.
What is the minimum order?
It varies by product and branding method. Tell us what you are planning and we will confirm the minimum before you commit to anything.
Can this product carry my logo?
Yes. Everything we supply can be branded. The method depends on the material and the shape of the surface, and we will confirm what works before you order.
What artwork do you need?
A vector file such as AI, EPS, SVG or PDF gives the cleanest result. If you only have a PNG or JPG, send it over and we will tell you whether it will hold up at size.
Can I see a proof first?
Yes. You approve a digital proof of every branding position before anything goes into production.